This is the all-new unit designed for the Bulldog single speed and two speed jacks, as well as the Fulton single speed and Ram single speed jackleg. The El-Pac 1 is capable of lifting 5,000 lbs. of jack weight and is used on living quarter trailers up to 28' on the floor. This system lifts 8 inches per minute under full load.

This is the all-new unit designed for the Binkley two-speed jack where mounting space is limited. Requires 5 inches of width clearance to mount. Capable of lifting 6,500 lbs. of jack weight, and used on living quarter trailers up to 32' on the floor. This system lifts 8 inches per minute under full load.

This is the most popular unit that we sell. This self-contained/ready to install jack provides 20, 24 or 30 inches of stroke, has a swivel footpad, and lifts 12,000 lbs. The AM series is available in a variety of mounting configurations.

These systems have a lifting capacity of 7500 Lbs. The jack assemblies are manufactured with a 3 1/2" x 3 1/2" outer tube and are available in 24" stroke length. The pump is attached to the jack and has a steel cover included. These should be used on trailers that have a 11' short wall or smaller.

This unit is available for bumper pull & towable trailers with a lifting capacity of 6,000 lbs. This unit is an easy installation for tongue jack applications.

With two 20, 24 or 30 inch jacks this set up has a total capacity of 24,000 lbs. One control box with dual switches gives the ability of operating each jack independently for uneven ground conditions. Pump style is either a horizontal or vertical mount and can be mounted on the jack with an optional pump cover.

This system is comprised of two of the 3"x 3" jacks with 24" of stroke. A single switch operates the legs in tandem. The system has an overall lifting capacity of 9000 Lbs.

This system is comprised of two of the 3 1/2" x 3 1/2" jacks with 24" of stroke. A single switch operates the legs in tandem. The system has an overall lifting capacity of 14,000 Lbs.

Since its' introduction, Auto-LevelŪ has quickly become the premium choice in leveling systems. The automatic, one touch operation levels a truck/trailer in less than two minutes operating each jack independently in a patented sequential process. Sequential leveling provides a more precise level state throughout the length of the truck/trailer.

Utilizing four two-way hydraulic cylinders, Auto-LevelŪ has the ability to extend and retract the jacks during the leveling sequence. This patented process results in added stability of the truck/trailer by not lifting the unit off the tires. The automatic All Retract feature makes stowing the jacks for travel fast and simple.